The TRP-C06 is an isolated RS232 to RS422 / RS485 converter designed for users who need an industrial grade interface conversion product to extend RS-232 transmission distance and increase network capability. Its superior industrial application design which includes wall mount options, terminal block wiring, external terminal block power and optical isolation for system protection, makes TRP-C06 suitable for use in critical industrial environments.
Features
- Auto direction flow control on RS-485
- Auto baud rate detection (up to 115.2 Kbps)
- Minimum 3000 V DC isolation protection
- Over current protection
- All RS-422/485 signals provide surge protection
- Power/TX/RX mode LED indicator
- Support screw terminal and standard external DC power adaptor
- Power input requirement from DC +10V to +30V
Specification
- Power requirement: DC voltage input from +10V to +30V
- Input: Standard D-SUB9 pin female connector
- Host connecting: Host to TRP-C06 converter (Standard RS-232 protocol TXD to TXD, RXD to RXD, GND to GND)
- Plug-in screw terminal wiring: Accepts 0.5 to 2.5 mm wires (AWG 1-#12 to #22)
- Distance: RS-422/485 up to 4000ft. (1250M)
- Converted signals selectable: RS-422 or RS-485 selectable mode by external switch
- Output: RS-485: differential 2 half-duplex wires, RS-422: differential 4 full-duplex wires
- Isolation voltage: 3000V optical DC
- Format: Asynchronous data with any combination of bits, parity, stop
- LED indicator: Power, TX, RX, statuses
- Voltage input type: Screw terminal and standard external DC power adaptor
- RS-422/485 connector: Industrial plug-in screw terminal
- Power Consumption: 1.2 watt
- Operating Temperature: 0 to 55 °C
- Humidity: 10-90% non-condensing
- Mechanical Dimensions (WxLxH): 74 x 111 x 26 mm (2.9 x 4.4 x 1.02 in)
Note: All documents are provided in English.
Package Contents
- TRP-C06 converter Optional Accessories
- T-SNAP DIN rail mounting adapter
- RS-232 cable
- SG-1200 1.2 Amp wall power supply
|
